Advertisement
All manuals and user guides at all-guides.com
4 Connecting to a Windows NT Server 4.0
Windows NT Workstation Version3.51
10 Set the path to "D:\NT" (Where "D:\" represents the drive letter assigned
to the CD-ROM) in the "Insert Disk" dialog box, and then insert the IBM
Token-Ring 16/4 PCI adapter and drivers CD. (If you have an HP
preloaded HDD, set path to "C:\Masters\LanDrv \DISK4\NT\")
11 Click "OK" at the "Install Driver" dialog box.
12 Select "IBM PCI Token-Ring Adapter" in the "Select OEM Option" dialog
box, and click "OK".
13 Click on the "OK" button in the "IBM PCI Token-Ring Adapter" dialog box.
14 Choose the default Protocol TCP/IP, and any additional Network
Protocols by clicking the check boxes in the "Windows NT Setup" dialog
box, and click "Continue."
(If you do not have the required information, contact your network
administrator)
15 Check the boxes to add additional TCP/IP components, and click on the
"Continue" button.
16 Click "OK" for the review of network settings, or "Network Settings"
dialog box.
17 Set your IP address information in the "TCP/IP Configuration" dialog box,
and click "OK".
(If you do not have the required TCP/IP settings, contact your network
administrator.)
18 At the "Domain/Workgroup Settings" dialog box, click on "OK" to accept
the default "Workgroup" as your workgroup name.
(If you do not have the required information, contact your network
administrator.)
19 To complete the installation, remove the floppy disk, and click on "Restart
Computer" in the "Windows NT Workstation Networking Setup" dialog
box.
Advertisement
