Advertisement
All manuals and user guides at all-guides.com
Windows NT
Requirements
Workstation
• HP Vectra with Windows NT Workstation 4.0 installed.
Version 4.0
• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.2
• Driver Name: IBMTRPO.SYS Size: 98K Date: 9/24/96
• Microsoft Windows NT Server 3.51 server that supports Net BEUI,
NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
Card State
Interrupt
I/O Address
Procedure
1 With the HP Vectra turned off, install the IBM 16/4 PCI TR adapter card into a PCI
slot.
2 Power on the machine and boot to Windows NT Workstation 4.0.
3 Click on "Start", up to "Settings", and open "Control Panel."
4 Double-click the "Network" icon in the "Control Panel" program group.
5 Click on "YES" in the "Network Settings" dialog box, and NT Networking
will be installed on your computer.
6 With "Wired to the Network" checked, click on "Next."
7 Click on "Select from List", then click "Have Disk."
8 Insert the IBM PCI Token-Ring Drivers CD, set the path to "D:\NT"
(Where "D:\" represents the drive letter assigned to your CD-ROM) in the
"Insert Disk" dialog box, and then click on "OK."
(If you have an HP preloaded HDD, set path to "C:\Masters\LanDrv
\IBMWOL\NT\")
9 Select "IBM PCI Token-Ring Adapter" in the "Select OEM Option" dialog
box, and click "OK".
10 With "IBM PCI Token-Ring Adapter" listed, click on "Next."
Vectra VL8
Vectra VE7/VE8
-
Enabled
11
10
C800-h
DC00-h
3 Connecting to a Windows NT Server 3.51
Windows NT Workstation Version 4.0
Advertisement
