Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
Media and Additional Parts
Description
Operator's Manual
Important: Without these parts, total setup cannot be completed.
Description
Verticutter
Transport roller assembly
Cotter pin
O-ring
Grease fitting
No parts required
No parts required
No parts required
No parts required
No parts required
Qty.
1
2
2
1
1
–
–
–
–
–
Qty.
1
Review the material and save in an appropriate place.
4
Use
Inspect the verticutter.
Install the transport rollers.
Install the O-ring and the grease fitting.
Adjust the blade depth.
Adjust the rear grass shield.
Adjust the roller scrapers.
Adjust the transport rollers.
Mount the verticutter reel.
Use