Table Of Contents - Toro Reelmaster 3100-D Series Operator's Manual

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
This product complies with all relevant European directives.
For details, please see the Declaration of Incorporation (DOI)
at the back of this publication.
Introduction
The verticutter kit is mounted on a ride-on machine and
is intended to be used by professional, hired operators
in commercial applications. It is primarily designed for
verticutting grass on well-maintained lawns in parks, sports
fields, and on commercial grounds.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Figure 1
numbers on the product. Write the numbers in the space
provided.
1. Location of the model and serial numbers
© 2016-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
identifies the model and serial
Figure 1
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
Safety and Instructional Decals ................................. 3
Setup ............................................................................ 4
1 Inspecting the Verticutter....................................... 5
2 Installing the Transport Rollers ............................... 5
3 Installing the O-ring and the Grease
Fitting ................................................................ 5
4 Adjusting the Blade Depth ..................................... 6
5 Adjusting the Rear Grass Shield .............................. 7
6 Adjusting the Roller Scrapers .................................. 7
7 Adjusting the Transport Rollers............................... 8
8 Mounting the Verticutter Reel ................................. 8
Product Overview .......................................................... 9
Specifications ......................................................... 9
Operation ..................................................................... 9
Training Period ....................................................... 9
Operating Tips........................................................ 9
Maintenance .................................................................10
Lubricating the Verticutter.......................................10
Removing the Verticutter Blades from the
Shaft .................................................................10
Installing the Verticutter Blades ................................11
Servicing the Roller.................................................11
g196972
2
(Figure
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
2),
g000502