Remote Management Limitations; Figure 108 Menu 24.11 Remote Management Control; Table 56 Menu 24.11 Remote Management Control - ZyXEL Communications ZyAIR G-3000 User Manual

802.11g business access point/bridge/repeater
Hide thumbs Also See for ZyAIR G-3000:
Table of Contents

Advertisement

Enter 11, from menu 24, to display Menu 24.11 - Remote Management Control (shown
next)

Figure 108 Menu 24.11 Remote Management Control

Menu 24.11 - Remote Management Control
TELNET Server:
FTP Server:
Web Server:
SNMP Service:
DNS Service:
The following table describes the fields in this menu.

Table 56 Menu 24.11 Remote Management Control

FIELD
Telnet Server
FTP Server
Web Server
SNMP Service
DNS Service
Port
Access
Secured Client IP
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.

19.3.5 Remote Management Limitations

Remote management over LAN or WAN will not work when:
Chapter 19 System Maintenance and Information
Note: If you enable remote management of a service, but have
applied a filter to block the service, then you will not be able to
remotely manage the service.
Port = 23
Secure Client IP = 0.0.0.0
Port = 21
Secure Client IP = 0.0.0.0
Port = 80
Secure Client IP = 0.0.0.0
Port = 161
Secure Client IP = 0.0.0.0
Port = 53
Secure Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Each of these read-only labels denotes a server or service that you may use to
remotely manage the ZyAIR.
This field shows the port number for the remote management service. You may
change the port number for a service if needed, but you must use the same
port number to use that service for remote management.
The DNS Service port number is 53. This cannot be changed.
Select the access interface (if any) by pressing the [SPACE BAR]. Choices are:
LAN only, WAN only, All or Disable. The default is LAN only.
The default 0.0.0.0 allows any client to use this service to remotely manage the
ZyAIR. Enter an IP address to restrict access to a client with a matching IP
address.
ZyAIR G-3000 User's Guide
Access = ALL
Access = ALL
Access = ALL
Access = ALL
Access = ALL
168

Advertisement

Table of Contents
loading

Table of Contents