142; Figure 79 Menu 23 System Security - ZyXEL Communications ZyAIR G-3000 User Manual

Table 46 Menu 23.2 System Security : RADIUS Server
FIELD
Active
Server Address
Port
Shared Secret
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
16.1.3 802.1x
The IEEE 802.1x standards outline enhanced security methods for both the authentication of
wireless stations and encryption key management.
Follow the steps below to enable EAP authentication on your ZyAIR.
1 From the main menu, enter 23 to display Menu23 – System Security.

Figure 79 Menu 23 System Security

2 Enter 4 to display Menu 23.4 – System Security – IEEE802.1x.
Chapter 16 System Security
DESCRIPTION
Press [SPACE BAR] to select Yes and press [ENTER] to enable user
authentication through an external accounting server.
Enter the IP address of the external accounting server in dotted decimal
notation.
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Specify a password (up to 31 alphanumeric characters) as the key to be
shared between the external accounting server and the access points.
The key is not sent over the network. This key must be the same on the
external accounting server and ZyAIR.
Menu 23 - System Security
1. Change Password
2. RADIUS Server
4. IEEE802.1x
Enter Menu Selection Number:
ZyAIR G-3000 User's Guide

142