Wizard Setup: General Setup; Figure 10 Wizard 1 : General Setup; Table 3 Wizard 1 : General Setup - ZyXEL Communications ZyAIR G-3000 User Manual

ZyAIR G-3000 User's Guide

3.2 Wizard Setup: General Setup

General Setup contains administrative and system-related information.
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave
this blank, the domain name obtained by DHCP from the ISP is used. While you must enter
the host name (System Name) on each individual computer, the domain name can be assigned
from the ZyAIR via DHCP.

Figure 10 Wizard 1 : General Setup

The following table describes the labels in this screen.

Table 3 Wizard 1 : General Setup

LABEL
System Name
Domain Name
Next
43
DESCRIPTION
It is recommended you type your computer's "Computer name".
In Windows 95/98 click Start, Settings, Control Panel, Network. Click the
Identification tab, note the entry for the Computer Name field and enter it as the
System Name.
In Windows 2000, click Start, Settings, Control Panel and then double-click
System. Click the Network Identification tab and then the Properties button.
Note the entry for the Computer name field and enter it as the System Name.
In Windows XP, click Start, My Computer, View system information and then
click the Computer Name tab. Note the entry in the Full computer name field
and enter it as the ZyAIR System Name.
This name can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes "-" and underscores "_" are accepted.
This is not a required field. Leave this field blank or enter the domain name here
if you know it.
Click Next to proceed to the next screen.
Chapter 3 Wizard Setup