Download Print this page

Motorola AL 200 Installation Manual page 7

Multi-user modem

Advertisement

Customer Support
• Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
- The power supply cord or plug is damaged.
- Liquid has been spilled, or objects have fallen into the product.
- The product has been exposed to rain or water.
- The product does not operate normally by following the operating
instructions.
- The product has been dropped or the cabinet has been damaged.
- The product exhibits a distinct change in operation.
• Ventilation
Holes on the top and side of the modem provide ventilation thereby ensuring
reliable operation of the product by protecting it from overheating. Do not
block or cover these openings. Do not block the openings by placing the
product on a bed, sofa, rug, or other similar surface. Do not place the product
in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been adhered to.
Do not block the unit's ventilation by placing objects on this product.
• Overloading
Do not overload wall outlets and extension cords as this can result in a fire or
electric shock.
• Unit Location
The AL200 has been certified as a mobile device as per FCC Section 2.1091.
In order to comply with the FCC RF exposure requirements the AL200 must
only be installed with approved antennas, and a minimum separation distance
of 20 cm must be maintained from the antenna to any nearby persons.
For technical support within North America, contact Motorola Customer Support at
(800) 544-0062.
For technical support outside of North America, refer to the following World Wide
Web site for your local Motorola representative:
http://www.mot.com/MIMS/Multimedia/cont
About This Manual (continued)
vii

Advertisement

loading