Control Leds - TP-Link AC1200 User Manual

Chapter 11
2. Set the current Date
3. Set the current Time
4. Click Save.
To set up Daylight Saving Time:
1. Select Enable Daylight Saving
2. Select the correct
time zone.
3. Select the correct
time zone.
4. Click Save.

11. 2. Control LEDs

The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
3. In the LED Control
(In MM/DD/YYYY
(In HH/MM/SS format).
Time.
Start date and time when daylight saving time starts at your local
End date and time when daylight saving time ends at your local
System Tools > System
section, tick the Enable Night Mode
format).
Parameters.
checkbox.
Manage the Router
67