Use Quick Setup Wizard; Manually Set Up Your Internet Connection - TP-Link AC1200 User Manual

Chapter 4
4. 1.

Use Quick Setup Wizard

The Quick Setup Wizard will guide you to set up your router.
Tips:
If you need the IPv6 internet connection, please refer to the section of
Follow the steps below to set up your router.
1. Visit http://tplinkwifi.net
for the router.
2. Click Quick Setup
to connect your router to the internet.
Note:
• If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process,
all your wireless devices must use the new SSID and password to connect to the router.
4. 2.

Manually Set Up Your Internet Connection

In this part, you can check your current internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your internet connection settings.
1. Visit http://tplinkwifi.net
for the router.
2. Go to Basic > Internet.
3. Select your internet connection type from the drop-down list.
4. Follow the instructions on the page to continue the configuration. Parameters on the
figures are just used for demonstration.
or http://192.168.0.1
on the top of the page. Then follow the step-by-step instructions
or http://192.168.0.1, and log in with the password you set
Set Up Internet Connection
Set Up an IPv6 Internet
,and log in with the password you set
Connection.
12