System Log - TP-Link AC1200 User Manual

Chapter 11
To forbid all devices to manage the router remotely:
Select Disable Remote Management
To allow all devices to manage the router remotely:
1. Select Enable Remote Management for All
2. Enter Web Management Port
3. Click Save.
Devices on the internet can log in to
as http://113.116.60.229:1024) to manage the router.
Tips:
• You can find the WAN IP address of the router on
• The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
To allow specific devices to manage the router remotely:
1. Select Enable Remote Management for Specified
2. Enter Web Management Port
3. In Remote Management IP
manage the router.
4. Click Save.
Devices using this WAN IP can manage the router by logging in to
IP:port number (such as http://113.116.60.229:1024).
Tips:
The router's WAN IP is usually a dynamic IP. Please refer to
to the router through a domain name.

11. 10. System Log

When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
To save the system log locally:
1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the
router.
2. Go to Advanced >
3. Choose the type and level of the system logs as needed.
4. Click Save Log to save the system logs to a local disk.
and click Save.
(1024-65535 or 80).
http://Router's WAN IP address:port number
Basic
(1024-65535 or 80).
address, enter the IP address of the remote device to
System Tools > System
Devices.
> Network Maps > Internet.
Set Up a Dynamic DNS Service Account
Devices.
Set Up a Dynamic DNS Service Account
Log.
Manage the Router
(such
if you want to log
http://Router's WAN
if you want to log in
76