Access Control - TP-Link AC1200 User Manual

Chapter 7
5. If you want to ignore the ping packets from the WAN port, select
From WAN Port; if you want to ignore the ping packets form the LAN port, select
Ignore Ping Packet From LAN
6. Click Save.
7. 1.

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
How can I
do that?
Port.
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or
the password you set for the router.
2. Go to Advanced
3. Enable Access Control.
4. Select the access mode to either block (recommended) or
allow the device(s) in the list.
To block specific device(s):
1 ) Select Blacklist
2 ) Select the device(s) to be blocked in the
table by ticking the checkbox(es).
> Security > Access
and click Save.
Network Security
Ignore Ping Packet
Control.
Online Devices
37