Module Identity - ABB S800 I/O User Manual

An S800 I/O module complies with the following framework:
• General:
–
–
–
• Parameters:
–
–
• Dynamic values:
–
–
#!! H‚qˆyrÃDqr‡v‡’
All S800 I/O modules contains a module identity. The module identity is used to
verify that an I/O module of the expected (user configured) type is mounted before
taking it operational. It protects the system from performing unexpectedly.
3BSE 020 925R101
Avryqiˆ†Ã8‚€€ˆvph‡v‚ÃD‡r…shprÃs‚…Ã6q‰h‡ÃAvryqiˆ†Ã
It has a Module Identity (see
It has a state that can be controlled (see
It reports status for modules and channels
It may have configuration parameters for the module and the channels.
It may have non-volatile parameters for each channel (factory settings)
All channels have dynamic values including quality status.
All output channels can be read for verification of the performance and
health.
Trp‡v‚Ã#!! DPÃH‚qˆyrÃAˆp‡v‚hyv‡’
Section 4.2.2.1, Module
Section 4.2.2.2, Module
ÃV†r…¶†ÃBˆvqr
Identity)
States)
39