Pausing Operation; Alarms - Hunter Soil-Clik Owner's Manual

Programming

Pausing Operation

Press to override the Soil-Clik. It will allow the controller to
water normally, even if the soil moisture level has been reached.
When it is in Pause mode, the Pause symbol is shown and the
rest of the screen is blank.
Press again to return to normal operation.
Pause does not pause watering. It overrides the
Soil-Clik, and allows watering.
Press to update the moisture level reading. The
Measurement icon will appear. An updated measurement (bars)
will appear within 5 seconds.
22

Alarms

The Alarm symbol shows an internal malfunction. Replace the
Soil-Clik Module if this occurs.