Adjustments.and.operation - Hunter RAIN CLIK WR-CLIK Owner's Manual And Installation Instructions

ADJUSTMENTS AND OPERATION ........................................
Transmitter Operation
There.is.nothing.to.set.up.with.the.
Wireless.Rain-Clik
Receiver Operation
The.receiver.has.two.LED.lights.that.indicate.
the.state.of.the.system..
SENSOR STATUS LED:
. RED.–.sensor.is.
wet.(watering.
disabled).
. GREEN.–.sensor.
dry.(watering.
enabled)
YELLOW.–.
sensor.is.in.
addressing.mode
12
.
™
Red light indicates
SENSOR BYPASS
sensor is bypassed
GREEN = Sensor is dry
SENSOR STATUS
RED = Sensor is wet
Press to bypass, press
again to re-enable
RAIN SENSOR BYPASS
SENSOR BYPASS LED:
. RED.–.rain.sensor.is.bypassed.(even.
though.the.sensor.is.bypassed,.the.
STATUS.LED.will.continue.to.alert.you.of.
the.state.of.the.sensor.(wet.or.dry).
. OFF.–.rain.sensor.is.enabled.
. FLASHING RED.–.indicates.that.
communication.between.the.transmitter.
and.receiver.was.lost.
Note:
When.you.first.apply.power.to.the.
receiver,.the.SENSOR.STATUS.LED.will.be.
RED..Press.the.manual.test.spindle.on.the.
transmitter.for.5.seconds.and.release.the.
spindle..The.SENSOR.STATUS.LED.will.turn.
GREEN.indicating.proper.operation.