Programming Moisture Levels - Hunter Soil-Clik Owner's Manual

Programming Moisture Levels

The bar steps in the display represent centibars of soil water
tension on a scale of 10 to 100. High numbers indicate dry soil, or
soil from which it is very difficult for plants to extract moisture.
The level of the arrows indicates the point at which irrigation
will be shut off.
0–10
10–30
30–60
60–100
100
Very wet
Sand
Silt and loam
Clay
Very dry
Start with a midrange setting based on the table or local
experience.
Observe results, and adjust as needed.
Press to increase, to decrease.
When the moisture level is reached, Soil-Clik stops the irrigation.
This is shown by the symbol.
Programming
21