Installation
Choosing the Probe Location
The moisture-sensing Soil-Clik probe must be installed
within 1,000' (300 m) of the Soil-Clik module, using
18 AWG (1 mm
2
) direct burial (UF) wire.
Choosing the Zone
Install the probe within the last typical zone to irrigate,
so that normal irrigation will not interrupt watering
prematurely.
4
Choose a zone with full sun exposure that is
in the fastest-drying area of the landscape. If
necessary, move valve wires so that this is the
last (highest-numbered) station to water.
1,000' (300 m)