Related Manuals for Leedarson Arrival Sensor
Summary of Contents for Leedarson Arrival Sensor
- Page 1 Leedarson Arrival Sensor Quick User Guide Draft Ver. Description Time V1.0 2016.10.10 V1.1 2017.06.02 Leedarson Lighting...
-
Page 2: Product Introduction
1 Product Introduction 1.1 Basic Information Arrival sensor integrated Z-Wave communication module to connect with Z-Wave gateway. By real-time communication to verify if the device in the communication range of gateway, system can automatically trigger some relative scenarios and send out messages to especial person. -
Page 3: Hardware Specification
Reset and Connection button built-in back cover and used for connecting and removing with gateway. Operation mode as following: Connection Turn on researching function in APP, short press button to add in Z-Wave system. Reset Hold on pressing button for 5 seconds, device reset to factory Leedarson Lighting... - Page 4 1. Sleeping and awaking of arrival sensor is based on integrated acceleration detector. If acceleration detector had not triggered for 2.5 minutes, arrival sensor send out a package to gateway and go to sleep mode. While acceleration sensor triggered, arrival sensor wake up and communication with gateway immediately.
- Page 5 —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help." Leedarson Lighting...
Need help?
Do you have a question about the Arrival Sensor and is the answer not in the manual?
Questions and answers