Selecting The On-Screen Display Language - Sharp XV-Z200U Operation Manual

3
Press , ,
on the remote control or
the projector to select the IN-
PUT mode.
• After pressing
use to select the desired input mode.
Note
• When no signal is received, "NO SIG-
NAL" will be displayed. When a sig-
nal that the projector is not preset to
receive is received, "NOT REG." will
be displayed.
About the INPUT modes
INPUT 1 Used for projecting im-
(Compo- ages from equipment
nent) connected to INPUT 1
terminals.
INPUT 2 Used for projecting im-
(Compo- ages from equipment
nent/RGB) connected to INPUT 2
terminal.
INPUT 3 Used for projecting im-
(S-Video) ages from equipment
connected to INPUT 3
terminal.
INPUT 4 Used for projecting im-
(Video) ages from equipment
connected to INPUT 4
terminal.
DIGITAL Used for projecting im-
ages from equipment
connected to DIGITAL
INPUT terminal.
Selecting the On-
screen Display Lan-
guage
English is the preset language for the On-
screen Display; however, this can be changed
to German, Spanish, Dutch, French, Italian,
Swedish, Portuguese, Chinese, Korean or
Japanese.
Display the "Language" menu and se-
lect the desired Language.
➝For operating the menu screen, see
pages 38 to 41.
, or
on
once on the projector,
"On-screen Display (Example)
INPUT 1 Mode
INPUT 2 Mode
INPUT 3 Mode
INPUT 4 Mode
DIGITAL INPUT Mode
On-screen Display
-31