Table of Contents
Advertisement
Connecting the Projector to Other Devices
Connecting to Compo-
nent Video Equipment
Using a 3 RCA to 15-pin
D-sub Cable and the
DVI to 15-pin D-sub
Adaptor (INPUT 2)
Use a 3 RCA to 15-pin D-sub cable and the DVI
to 15-pin D-sub adaptor when connecting com-
ponent video equipment such as DVD players
and DTV decoders to INPUT 2 terminal.
1
Connect a DVI to 15-pin D-sub
adaptor to the projector.
2
Connect a 3 RCA to 15-pin D-
sub cable to the above adaptor.
• Secure the connectors by tightening the
thumbscrews.
3
Connect the above cable to the
video equipment.
Note
• When connecting this projector to com-
ponent output terminal of the DTV de-
coder, select "Component" for "Signal
Type" on the OSD menu or press
the remote control. (See page 52.)
• Make sure to turn both the projector and
the video equipment off before connect-
ing.
-18
-18
Optional
accessories
To INPUT 2 terminal
on
To analog component
output terminal
3 RCA to 15-pin
D-sub cable
Type: AN-C3CP
(9'10" (3.0 m))
DVI to 15-pin
D-sub adaptor
Type: AN-A1DV
(7.9" (20 cm))
DVI to 15-pin
D-sub adaptor
(sold separately)
3 RCA to 15-pin
D-sub cable
(sold separately)
DVD player or
DTV decoder
Advertisement
Table of Contents
