Adjusting The Color Temperature - Sharp XV-Z200U Operation Manual

Adjusting the Color
Temperature
This function allows for selecting the desired
color temperature. With the lower value se-
lected, the projected image becomes warmer,
reddish and incandescent-like while with the
higher value, the image becomes cooler, blu-
ish and fluorescent-like.
Select "CLR Temp" in the "Picture"
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Selected Item Description
5500K The less the value is set to, the
warmer, reddish, incandescent-like
6500K
the image becomes.
7500K
8500K
The more the value is set to, the
9300K
cooler, bluish, fluorescent-like the
image becomes.
10500K
"CLR Temp" is fine adjusted by following the
procedure below.
1
Select "CLR Temp" in the "Pic-
ture" menu on the menu
screen and press
• A single menu bar of "CLR Temp" is
displayed.
2
' ' ' ' or " " " " " to fine adjust the
Press '
color temperature.
• With the lower value selected, the pro-
jected image becomes magenta-
tinged. With the higher value selected,
the projected image becomes green-
tinged.
• Pressing \ or | changes the value of
the color temperature in the sub menu.
Note
•Values on "CLR Temp" are only for gen-
eral standard purposes.
.
On-screen Display
-45