Table of Contents
Advertisement
Setup
Image Projection
Rear Projection
I Place a translucent screen between the projector and the au-
dience.
I Use the projector's menu screen to reverse the projected im-
age. (See page 56
for use of this func-
tion.)
Note
• Optimal image quality can be achieved when the projector is
positioned perpendicular to the screen with all feet flat and lev-
eled.
Projection using a mirror
I Place a mirror (normal flat type) in front of the lens.
Info
• When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
Ceiling-mount setup
I It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
I Before
mounting
projector, remove the
Swivel Stand. (See pages
24 and 25 for removing and
attaching the Swivel Stand.)
I Before
mounting
projector, contact your
nearest
Author ized
SharpVision Service Center
or Dealer to obtain the recommended ceiling-mount bracket
(sold separately). (AN-CM260 ceiling-mount bracket, AN-
EP101B extension tube for AN-CM260.)
I When the projector is in the inverted position, use the upper
edge of the screen as the base line.
I Use the projector's menu screen to select the appropriate pro-
jection mode. (See page 56 for use of this function.)
-28
the
the
When using the default setting.
MOn-screen Display
The image is reversed.
When using the default setting.
MOn-screen Display
The image is inverted.
Advertisement
Table of Contents
