Connecting To A Dvd Player And Dtv Decoder - Sharp XV-Z200U Operation Manual

Connecting to a DVD Player and DTV Decoder

Connecting to
Component Video
Equipment Using a
Component Cable
(INPUT 1)
Use a component cable when connecting com-
ponent video equipment such as DVD players
and DTV decoders to INPUT 1 terminals.
1
Connect a component cable to
the projector.
2
Connect the above cable to the
component video equipment.
Note
• Make sure to turn both the projector and
the video equipment off before connect-
ing.
To INPUT 1 terminals
Component cable
(commercially available)
To analog component
output terminal
DVD player or
DTV decoder
-17