Table of Contents
Advertisement
3.8
To install the side discharge chute, lift the side discharge door.
NOTE DO NOT install the grass catcher, side chute and mulching plug simultaneously.
When one is installed, the other two should not be.
3.9
Place the hooks found on the side discharge chute into their respective grooves
underneath the hinges of the side discharge door.
3.10
If installed correctly, the side chute should be positioned approximately parallel
to the ground.
3.11
Lower the side discharge door to rest on top of the side discharge chute.
3.12
To adjust the cutting height use the wheel height adjustment lever.
3.13
Pull the lever out, towards the wheel and move forwards or backwards to one fo
the 5 pre-set cutting heights.
3.14
The cutting height will be adjusted on all 4 wheels simultaneously.
3.15
Release the lever to lock the cutting height in to place.
Lowest Cutting Height
15
Hide quick links:
Advertisement
Table of Contents
