Connecting To A Monitor With Rgb Input Terminal - Sharp Notevision PG-C355W Operation Manual

Controlling the Projector by a Computer
When connecting to the LAN terminal using a LAN cable
HUB
or
Computer
LAN cable (Category 5 type, commercially available)
Note
• When connecting to hub, use straight-through Category 5 (CAT.5) type cable (commercially available).
• When connecting to computer, use cross-over Category 5 (CAT.5) type cable (commercially available).

Connecting to a Monitor with RGB Input Terminal

You can display computer images on both the projector and a separate monitor using two sets of RGB cables.
Monitor
-28
Computer
To RGB input terminal
RGB cable (commercially available)
TX/RX LED (yellow)
Illuminates when transmitting/receiving data.
LINK LED (green)
Illuminates when linked.
To LAN terminal
Supplied
accessory
To COMPUTER/
COMPONENT 1
input terminal
To RGB output
terminal
RGB cable
* To ensure safety, do not connect the
LAN terminal with any cables such
as a telephone line that may cause
excessive voltage.
RGB cable
To MONITOR OUT terminal