Picture Adjustment ("Picture" Menu); Selecting The Picture Mode; Adjusting The Image; Adjusting The Color Temperature - Sharp Notevision PG-C355W Operation Manual

Picture Adjustment ("Picture" menu)

Picture SIG
1
Picture Mode
Contrast
Bright
Color
2
Tint
Sharp
Red
Blue
3
CLR Temp
4
Progressive
5
Film Mode
6
DNR
7
MNR
8
Eco+Quiet Mode
Reset
SEL./ADJ.
RETURN
1

1 Selecting the Picture Mode

1
1 1
Selectable items Description
Standard For standard image
Presentation Brightens portions of
image for more enhanced
presentations.
Movie Gives natural tint to the
projected image.
Game Gives sharpness to the
projected image.
*sRGB For high fidelity reproduc-
tion of images from a
computer.
• "sRGB" is displayed only when RGB signal is input.
• You can set or adjust each item in the "Picture"
menu to your preference. Any changes you make
are retained in memory.
Note
• You can also press PICTURE MODE on the
remote control to select the picture mode. (See
page 36.)
• *sRGB is an international standard of color re-
production regulated by the IEC (International
Electrotechnical Commission). As the fixed color
area has been decided by the IEC, the images
are displayed in a natural tint based on an origi-
nal image, when "sRGB" is selected.
For additional information about the sRGB func-
tion, visit "http://www.srgb.com/".
You cannot set the items, "Red", "Blue" and
"CLR Temp", when "sRGB" is selected.
Info
• When "sRGB" is selected, the projected image may be-
come dark, but this does not indicate a malfunction.
SCR PRJ Net.
Standard
0
0
0
0
0
0
0
7500K
3D Progressive
Auto
Off
Off
Off
ENTER
END
The default
settings of
CLR Temp
7500K
7500K
6500K
7500K
–
Menu operation

2 Adjusting the Image

2 2
2 2
button \ \ \ \ \
Adjustment items
Contrast For less contrast.
Bright For less brightness.
*1
Color For less color
intensity.
Tint *1 For making skin
tones purplish.
Sharp *1 For less sharpness.
*2
Red For weaker red.
*2
Blue For weaker blue.
*1 Not adjustable/selectable in the RGB input mode.
*2
Not adjustable/selectable when selecting "sRGB"
in "Picture Mode".
Note
• "Red" and "Blue" cannot be set when selecting
"sRGB" in "Picture Mode".
• To reset all adjustment items, select "Reset" and
press ENTER.

3 Adjusting the Color Temperature

3 3 3 3
Selectable items
5500K For lower color temperature for warmer,
6500K
reddish incandescent-like images.
7500K
8500K
9300K For higher color temperature for cooler,
10500K bluish, fluorescent-like images.
Note
• Values on "CLR Temp" are only for general stan-
dard purposes.
• "CLR Temp" cannot be set when selecting
"sRGB" in "Picture Mode".
Page 43
button | | | | |
For more contrast.
For more brightness.
For more color
intensity.
For making skin
tones greenish.
For more sharpness.
For stronger red.
For stronger blue.
Description
-45