Quick Start - Sharp Notevision PG-C355W Operation Manual

Quick Start

This section shows the basic operation (projector connecting with the computer). For details, see the page
described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
4 Tilt dial
1.
Place the projector facing a screen
2.
Connect the projector to the computer and plug the power
cord into the AC socket of the projector
When connecting equipment other than the computer, see pages
3.
Remove the lens cap and turn the projector on
-16
3 7 STANDBY/ON button
6 INPUT buttons
6 ENTER button
5 Zoom knob
5 Focus ring
4 Height Adjustment buttons
On the projector
7 STANDBY
button
3 ON button
6 COMPUTER 1
button
25, 28 and 29.
On the remote control
Page 18
Pages 23, 30
Page 30