Switching On The Appliance; Selecting The Temperature; Fanbutton; Temperature Alarm - Gaggenau RW 404 Operating Instructions Manual

Switching on the appliance

Connect the mains plug.
D
Keep the on/off button pressed until the temperature
D
display lights up.

Selecting the temperature

The temperatures in both compartments can be set
independently of each other from +5 °C to +20 °C.
Press the top or bottom compartment selection
D
button. The corresponding temperature display
flashes.
Change the temperature at the + and - buttons.
D
+ button raises the temperature (warmer)
- button
lowers the temperature (cooler)
Each press of the button changes the temperature
by 1 °C.
About five seconds after a button is last pressed the
electronics module switches over automatically and
the actual temperature is displayed.
24

Fanbutton

The fan button should be activated when wine is to be
stored over the long term. The fan symbol appears on
the display.
This gives rise to an interior climate typical of a wine
cellar.
The raised air humidity prevents the corks from drying
out.

Temperature alarm

The acoustic alarm warns you when your wines are
exposed to unfavourable temperatures.
It sounds when it is too cold or too warm in the interior.
At the same time the temperature display flashes.
It always sounds when the door is open for longer than
sixty seconds.
Press the alarm off button to switch off the alarm.
D
The temperature display continues flashing until the
alarm status has ended.