Gaggenau RW 404 Operating And Installation Instructions page 35

2. Using the spanner supplied, adjust all 4 feet so that
the appliance stands level and the top of the appli
ance clears the kitchen unit by a distance of 4 mm.
Engage spanner according to direction of rotation.
Turning foot clockwise: raises appliance;
turning foot anti clockwise: lowers appliance
Caution! Risk of damage
!
If the appliance is leaning over, the appliance carcass
may become deformed so that the door no longer closes
properly. Align the appliance horizontally and vertically.
3. Push the appliance into the kitchen unit until the
appliance door is flush with the unit fronts.
When doing so, make sure that the mains power
lead is not damaged.
10 mm
4. Insert the foam moulding approx. 10 mm into the
space shown in the appliance base.
Important: if the foam moulding is not inserted, the
appliance will not achieve its full cooling capacity.
5. Open the door.
6. Remove cover plate and fix appliance to the kitchen
unit carcass using one of the screws supplied.
7. Replace cover plate.
8. Fix appliance to the kitchen unit carcass at the
bottom on the left and right using the two other
screws supplied.
35