Toshiba RAS-B10U2FVG-E Service Manual page 89

No. Part name
Electrical parts 1) Remove screw for E-box cover.
②
Box assembly
(E-box)
2) Remove screw for drain guide. (4 pcs)
3) Remove screw for earth-lead.
4) Remove screw for display base.
5) Pull off the TC, TCJ sensor.
6) Take off fan motor conector.
7) Take off louver motor conector.
8) Take off damper motor conector.
9) Remove screw for earth-lead from fan
motor base.
10) Remove screw for E-box
11) - ① Pull the upper part of the E-box.
11) - ② Lift a E-box in the upward for
take off from the hook.
Procedure
- 89 -
Remarks
TC sensor
1) Screw for E-box cover
2) Screws for
drain guide
(4 pcs)
7) Louver motor connector
9) Screw for earth-lead from
fan motor base
10) Screw for E-box
8) Damper motor connector
6) Fan motor connector
②
①
FILE NO. SVM-18048
Tube
TCJ sensor
4) The screw for
display base
3) Screw for
earth-lead
5) TCJ sensor
5) TC sensor
Hook for locking E-box