Inserting A Minidisc - Sharp MD-MT90 Operation Manual

Inserting a MiniDisc

1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.
Notes:
z Do not place the MiniDisc under the holder.
z If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resist-
ance is felt, remove the MiniDisc and reload it.
z The lid cannot be opened if "TOC" is displayed.
Refer to the instruction on page 13.
00/12/26 90SEC_09_11.fm
9