Table of Contents
Advertisement
Advanced Recording
„ Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (Synchronized recording).
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this portable MD.
18
3
Press the
or
button to adjust the re-
cording level. (See page 12.)
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Select the starting point for your recording and
press the PAUSE button.
5
Press the ENTER/SYNC button.
z "SYNC" will be displayed.
z To cancel the operation, press the /:OFF but-
ton.
6
Begin playback on the stereo system. Re-
cording will begin automatically.
To interrupt recording
z When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.
z If a silence lasts for 3 seconds or more, the recording
will be paused (the pause function does not work for
approximately 10 seconds after a recording starts).
When the unit receives sound again, recording auto-
matically starts.
z A new track number is created when the recording
resumes.
00/12/26
90SEC_16_30.fm
Advertisement
Table of Contents
