Inserting A Minidisc - Sharp MD-MT99H Operation Manual

Inserting a MiniDisc

Web-site: www.sharp.co.uk/support
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.
Notes:
z Do not place the MiniDisc under the holder.
z If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resist-
ance is felt, remove the MiniDisc and reload it.
z The lid cannot be opened if "TOC" is displayed; refer
to the instruction on page 14.
Help Line: 08705 274277 (office hours)
01/4/4
9
99UK_2.fm