Recording From A Microphone - Sharp MD-MT90 Operation Manual

Recording from a Microphone

„ To record from a microphone
1
Connect a stereo microphone to the MIC
IN jack.
2
Insert a recordable MiniDisc (page 9).
3
Press the REC button.
4
Press the or button to adjust the re-
cording level.
Adjust the recording level so that the maximum
sound volume from the source makes the reading
swing between --- 4 dB and 0 dB.
5
Press the PLAY/PAUSE button.
Recording will start.
To interrupt a recording
Press the PLAY/PAUSE button while recording.
To resume recording, press the PLAY/PAUSE button
again. The track number will be increased by one each
time you interrupt a recording.
To stop recording
Press the /:OFF button.
To write recorded contents on the MiniDisc
Press the /:OFF button while in the stop mode.
00/12/26 90SEC_16_30.fm
23