Recording - Sharp MD-MT90 Operation Manual

Recording

1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this portable MD.
12
3
Press the or button to adjust the re-
cording level.
Analog recording
Adjust the recording level so that the maximum
sound volume from the source makes the reading
swing somewhere between 4 dB and 0 dB.
Digital recording
You can adjust the level in 1dB increments within
the range of +12 - 12dB.
Once you adjust the digital recording level, the set-
ting remains even after the recording stops. (For
cancellation instructions, see page 31.)
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Here you can search for the track to record.
00/12/26 90SEC_12_15.fm