Table of Contents
Advertisement
Recording from a Microphone (continued)
„ Sound-actuated recording (Mic Syn-
chronized recording)
1
Press the REC button.
2
Press the
or
button to adjust the re-
cording level.
3
Press the ENTER/SYNC button to select
the recording sensitivity.
MIC SYNC H :
Recording starts when the unit
detects --- 24 dB or more (The unit
can start recording from quiet
sounds).
MIC SYNC L :
Recording starts when the unit
detects --- 12 dB or more.
4
When a sound, such as person speaking,
is picked up by the microphone, recording
will begin automatically.
24
About the pause function
The unit automatically pauses when the microphone
does not pick up any sound for 3 seconds or more.
(The pause function does not work for approximately 10
seconds after a recording starts.) When the microphone
picks up sound again, recording starts automatically.
Notes:
z While making a mic recording, do not connect any-
thing to the OPTICAL/LINE IN jack on the portable
MD.
z To use a microphone, be sure it is a plug-in-power
type microphone.
- When a plug-in-power type microphone is plugged in,
the portable MD will provide power for the microphone's
operation.
- If a different type of microphone is plugged in, it may not
operate properly or it may cause the unit to malfunction.
z Insert the plug firmly. If you don't, the recording will not
be made properly.
z Use a microphone with a 1/8" (3.5 mm) diameter
stereo mini plug.
z If the unit starts recording too often from low unwanted
noises, set the microphone input to "MIC SYNC L".
z Recording sensitivity can be changed while recording.
00/12/26
90SEC_16_30.fm
Advertisement
Table of Contents
