Sharp MD-MT90 Operation Manual page 27

Sharp minidisc player user manual
Hide thumbs Also See for MD-MT90:
Table of Contents

Advertisement

„ To display the playing time of an indi-
vidual track
1
While in the stop mode, press the
button to display the track number and
track name.
2
Press the DISP button to display the play-
ing time for that track.
Each time the
or
button is pressed, the playing
time of the previous or next track will be displayed.
„ Checking the remaining amount of bat-
tery level
The remaining amount of battery level is shown by the
or
battery indicator (
) during operation.
z When the battery is completely discharged, the bat-
tery indicator will flash. Recharge the battery or
replace the alkaline battery with a new one.
z When the battery has run completely out, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
z If you use the battery which you stopped charging
halfway, "
" may appear. It does not mean that the
battery is completely charged.
z The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
z When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
z The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
00/12/26
27
90SEC_16_30.fm

Advertisement

Table of Contents
loading

Table of Contents