Table of Contents
Advertisement
z Poor connection of the digital cable.
NO SIGNAL
z No output signal comes out from the
connected unit to playback.
z The input signal has improper sampling
frequency.
z You tried to play back a track that can-
NOT PLAY
not be played with this equipment.
z You recorded on a playback-only disc. z Replace it with a recordable disc.
PLAY MD
z Improper power is being supplied.
POWER ?
z The write protection tab of a MiniDisc is
PROTECTED
set to the protected position.
z You tried to record on a playback-only disc. z Replace it with a recordable MiniDisc.
z Since a track number is currently being
SORRY
located or updated, the unit cannot ac-
cept your command.
z The temperature is too high.
TEMP OVER
z There is an error in the recording signal. z Erase all of the tracks, and then record again.
TOC FORM (**)
z There is no space left for recording
TOC FULL
character information (track names,
disc names, etc.).
z The track has been protected from be-
Tr. Protect
ing erased.
z A disc which contains data other than
? DISC
music was played.
z There is an error in the signal recorded
on the disc.
Number or symbol appears in (*) position.
z Connect the digital cable securely.
z If the portable CD player has a function to prevent sound
skips, deactivate it.
z Play back with the connected unit.
z Play back another track.
z Use one of the specified power sources.
z Move the write protection tab back to its original posi-
tion.
z Wait for a while and try the operation again.
z Turn off the power, and wait for a while.
z Replace it with another recordable disc.
z Edit the track with the device on which it was recorded.
z A disc which contains non-music data cannot be played.
z Replace it with another recorded disc.
00/12/26
90SEC_40_47.fm
43
Advertisement
Table of Contents
