Advanced Recording - Sharp MD-SR75H Operation Manual

Advanced Recording

Playback sound-actuated recording
(Synchronized recording)
Recording automatically starts or pauses by detect-
ing sound from the stereo system (Synchronized
recording).
20
Web-site: www.sharp.co.uk/support
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this unit.
3
Press the REC LEVEL ( 5
to adjust the recording level
(analogue connection only).
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Select the starting point for your recording and
press the PAUSE button.
5
Press the ENTER/SYNC button.
6
Begin playback on the stereo system.
Recording will begin automatically.
To interrupt recording:
When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.
If a silence lasts for 3 seconds or more, the recording
will be paused (Pause function does not work for
approximately 10 seconds after a recording starts).
When the unit receives sound again, recording automati-
cally starts.
A new track number is created when the recording re-
sumes.
To stop recording:
Press the • /:OFF button.
To write recorded contents on the MiniDisc
Press the • /:OFF button whilst in the stop mode.
Help Line: 0990 274277 (office hours)
5 or 4 4 ) button
5 5 4 4
5 4