Recording - Sharp MD-SR75H Operation Manual

Recording

Before recording
14
Web-site: www.sharp.co.uk/support
1
Check that the HOLD switch
on the back is released.
2
The unit does not work if the
switch is set to HOLD.
3
As for the details, see page 9.
4
5
6
Help Line: 0990 274277 (office hours)
Press the REC button.
Record pause mode is entered.
Begin playback on the stereo system con-
nected to this unit.
To enable the record level to be set.
Press the REC LEVEL (5 5 or 4 4 ) button
5 5 5 4 4 4
to adjust the recording level (analogue
connection only).
Adjust the recording level so that the maximum
sound volume from the source makes the read-
ing swing somewhere between –4 dB and 0 dB.
Level meter indicator
0dB
4dB
For digital connection, it is not necessary to ad-
just the recording level.
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode at
the point you wish to start recording.
Here you can select the track to be recorded.
Press the 06 06 button to start the MiniDisc
06 06
06
unit recording.
Begin playback on the stereo system, the
output will be recorded.