Interim Spin - Miele WWV 980 WPS Passion Operating Instructions Manual

Omitting the final spin (Rinse
hold)
If Rinse hold is selected, the laundry re-
mains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be re-
moved from the drum immediately after
the end of the programme.
 Select the
Rinse hold
To start the final spin
You can reduce the spin speed.
 Touch the
Change spin speed
 Select the desired spin speed.
 Start the final spin with the Start/Stop
control.
To end the wash programme
Select this option if you want to remove
the laundry when it is dripping wet and
without spinning.
 Touch the
Change spin speed
 Select Spin speed
 Touch the Start/Stop sensor.
The water will be pumped away.
Extra.
sensor.
sensor.
0 rpm (no spin).

Interim spin

There is a spin cycle after the main
wash and between the rinses. A reduc-
tion in the final spin speed will also re-
duce the interim spin speed as appro-
priate.
Omitting the interim spin and
the final spin
 Touch the
Spin speed
 Select the
0 rpm
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
Spinning
sensor.
setting.
41