Fault Message After A Programme Has Been Interrupted - Miele WWV 980 WPS Passion Operating Instructions Manual

Problem solving guide

Fault message after a programme has been interrupted.

Problem

Drainage fault. Clean
drain filter and pump.
Check the drain
hose.

Water intake fault.
Open the stopcock.

Fault F. If restart
fails, call Service.

Waterproof system
activated. Close
stopcock and call
Service
To switch off the fault messages: Switch the washing machine off with the  but-
ton.
72
Cause and remedy
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
 Clean the drain filter and the drain pump.
 The maximum delivery head is 1.8 m.
The water intake is blocked or restricted.
 Check whether the stopcock has been properly
opened.
 Check whether the intake hose is kinked.
 Check whether there is sufficient water pressure.
The filter in the water intake is blocked.
 Clean the filter.
There is a fault.
 Disconnect the washing machine from the mains
electricity supply, either by switching it off at the
wall socket and withdrawing the plug, or by dis-
connecting it at the circuit breaker.
 Wait at least 2 minutes before reconnecting the
washing machine to the mains electricity supply.
 Then switch the washing machine on again.
 Restart the programme.
If the fault message appears again, contact Miele.
The water protection system has reacted.
 Close the stopcock.
 Call Service.