Interim Spin; Omitting The Final Spin (Rinse Hold); Omitting The Interim Spin And The Final Spin - Miele WWI660 TDos XL Operating Instructions Manual

Interim spin

There is a spin cycle after the main
wash and between the rinses. A reduc-
tion in the final spin speed will also re-
duce the interim spin speed as appro-
priate.
Omitting the final spin (Rinse
hold)
If Rinse hold is selected, the laundry re-
mains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be re-
moved from the drum immediately after
the end of the programme.
 Set the spin speed
To start the final spin
The washing machine will display the
maximum spin speed possible. You can
reduce the spin speed.
 Touch the Start/Stop sensor.
To end the wash programme
Select this option if you want to remove
the laundry when it is dripping wet and
without spinning.
 Reduce the spin speed to
 Touch the Start/Stop sensor.
The water will be pumped away.
 .
0 .
Omitting the interim spin and
the final spin
 Before the start of the wash pro-
gramme, reduce the spin speed to
 Touch the Start/Stop sensor.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
Spinning
.
0
41