Table of Contents
Advertisement
Final spin speed in the pro-
gramme
When a programme is selected, the op-
timum spin speed for this wash pro-
gramme is shown in the display.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is in-
dicated in the table.
Programme
Cottons
Minimum iron
Delicates
Woollens
Silks
Shirts
Express 20
Dark garments / Denim
Outerwear
Proofing
Sportswear
Automatic plus
Separate rinse/Starch
Drain / Spin
Clean machine
Interim spin
There is a spin cycle after the main
wash and between the rinses. A reduc-
tion in the final spin speed will also re-
duce the interim spin speed as appro-
priate.
Omitting the final spin (Rinse
hold)
If Rinse hold is selected, the laundry re-
mains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be re-
moved from the drum immediately after
the end of the programme.
Set the spin speed
To start the final spin
rpm
The washing machine will display the
1400
maximum spin speed possible. You can
1200
reduce the spin speed.
900
Touch the Start/Stop sensor.
1200
To end the wash programme
600
Select this option if you want to remove
900
the laundry when it is dripping wet and
1200
without spinning.
1200
Reduce the spin speed to
800
Touch the Start/Stop sensor.
1000
The water will be pumped away.
1200
1400
Omitting the interim spin and
1400
the final spin
1400
Before the start of the wash pro-
900
gramme, reduce the spin speed to
Touch the Start/Stop sensor.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
Spinning
.
0
.
0
39
.
Advertisement
Table of Contents
