Grounding Instructions; Specifications - Nautilus E618 Service Manual

Grounding Instructions

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet,
have a proper outlet installed by a qualified electrician.
This machine is for use on a nominal 120-V circuit, and has a grounding plug that looks like the plug illustrated below. A
temporary adapter that looks like the adapter illustrated may be used to connect this plug to a 2-pole receptacle as shown
if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician.
The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such
as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
Grounded
Outlet
Grounding Pin

Specifications

27"
(68.5 cm)
66.9"
(170 cm)
73"
(185.5 cm)
Grounded
Outlet Box
Maximum User Weight:
Maximum Pedal Height - with full incline:
Machine Weight:
Power Requirements:
Operating Voltage:
Operating Current:
Heart Rate Chest Strap:
DO NOT dispose of this product as refuse. This product is
to be recycled. For proper disposal of this product, please
follow the prescribed methods at an approved waste
center.
4
Adapter
Metal Screw
Tab for
Grounding
Screw
350 lbs. (158.8 kg)
28" (72 cm)
209.7 lbs. (95.1 kg)
120V AC @60Hz
2 A
1 CR2032 battery