Spectrum 55140 Assembly Instructions

Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(1) 050573
Folding shelf
(2) 056886
12" x 8" Fold-
ing brackets
(1) 050574 (1) 050575
Left shelf Right shelf
support support

1. Attach support brackets

1. Attach the left and right support brackets to the LINK cart as
shown using (2) 1/4-20 x 20mm JC bolts per bracket. Figure 1.
2. Do not tighten the JC bolts completely yet.

2. Attach folding brackets

1. Determine the height you would like the shelf to be mounted.
2. Open each folding bracket, and align the mounting holes at the desired height.
3. With an electric drill, driver extension, and #1 Phillips driver, attach each folding bracket to a support bracket
with (3) #8 x 1/2" thread-cutting screws. Tighten securely, but be careful not to strip out the holes. Figure 2.
(8) 026073
#8 x 3/4" PHSM
screw
(4) 044541
1/4-20 x 20mm
JC bolts
(8) 0100167
#8 x 1/2" PH
Thread-cutting
screw
(1) 039622
2" Grommet
Support brackets
attached with 2 JC bolts
(do not tighten completely)
Figure 1
Flip-up shelf
for LINK Lectern
55140
(1) 025039
4mm Hex
wrench
Support
bracket
Folding
bracket
#8 x 1/2" PH thread-
cutting screws
(3 per bracket)
Phillips
screwdriver
Drill with #1 Phillips
driver and extension
4mm Hex wrench
(included)
Figure 2
050581R8 Page 1 of 2