Spectrum 55148 Assembly Instructions

Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!

Upper Logo Panel Installation

1. To install, locate the (2) holes under the worksurface edge on the
audience-side and install the (2) #8 x 5/8" PHSM screws, but do
not tighten completely. Figure 1.
2. Align the logo panel slots with the screws, placing the panel
against the lectern.
3. Shift the logo panel slightly to the left to lock into the keyhole slots,
then secure by tightening the screws securely. Figure 1A.
(1) 0119288
Upper Logo Panel
(1) 0119283 backer
(2) 037542
#8 x 5/8" PHSM
(1) 0119287
Lower Logo Panel
(1) 0119298 backer
Customized Logo Panel(s) for Honors Lectern
Upper logo
panel
R E
H E
G O
L O
U R
Y O
R E
H E
G O
L O
U R
Y O
Upper - 55148
Lower - 55149
(2) 037542
#8 x 5/8" PHSM
Figure 1A
0119488R1 Page 1 of 2
Phillips
screwdriver
Figure 1