Memory Check - Sharp R-22GT Operation Manual

Memory check

You can check the information programmed into the
memory.
Checking time and power level
* Suppose you want to know the information pro-
grammed into the memory 1, programmed for 4
minutes at 60% for the 1st stage and 2 minutes at
30% at the 2nd stage.
Procedure
CHECK
1 Touch CHECK
pad.
1
2 Touch number
pad.
Note: 1. To cancel memory check, touch the
CHECK pad.
2. When
the memory is not set.
3. (For R-22 GT/23GT/24GT/25JT)
If you want to check memory 11-20,
touch the desired number pad twice.
Display
NO. CHECK
NO.
After about 1 sec.
REPEAT
is displayed at Step 1,
Checking magnification
* Suppose you want to know the magnification fac-
tor for double quantity in memory 1.
Procedure
CHECK
1 Touch CHECK pad.
DOUBLE
QUANTITY
2 Touch DOUBLE
QUANTITY pad.
1
3 Touch number pad.
Note: 1. To cancel memory check, touch the
CHECK pad.
2. The magnification factor 1.80 for the
DOUBLE QUANTITY is stored in all
memories when the oven is shipped.
10
Display
NO. CHECK
NO. X2 CHECK
NO. X2 CHECK
After about 1 sec.
X2 CHECK