Memory Check - Sharp R-21ATP Operation Manual

MEMORY CHECK

You can check the information programmed into the memory.
CHECKING TIME AND POWER LEVEL
Example: If you want to know the information programmed into the memory 1, memory 1 has been programmed for
4 minutes on 60% for the 1st sequence and 2 minutes on 30% for the 2nd sequence.
Step
1
Press the CHECK pad.
2
Press the NUMBER pad
Note: 1. To cancel MEMORY CHECK, press the CHECK pad.
2. When
3. To check the time constant for double quantity, press the DOUBLE QUANTITY pad and the desired
NUMBER pad in step 2.
Procedure
.
is displayed at Step 1, the memory is not set.
Pad Order
11
Display
NO.
NO. will flash on and off.
NO. CHECK
After about 1 sec.
CHECK
CHECK
CHECK
CHECK
REPEAT