Memory Check; Checking Time And Power Level; Checking Magnification - Sharp R-21LCFS Operation Manual

Memory check

You can check the information programmed into
each memory.

Checking time and power level

* Suppose you want to know the information pro-
grammed into memory 1, programmed for 4 minutes
at 60% for the 1st stage and 2 minutes at 30% at
the 2nd stage.
Procedure
CHECK
1 Touch CHECK
pad.
1
2 Touch number
pad.
Note: 1. To cancel memory check, touch the
CHECK pad.
2. When is displayed at Step 1, the
memory is not set.
3. (For R-21LTF)
If you want to check memory 11-20, touch
the desired number pad twice within 1
second.
Display
NO. CHECK
NO. NO. CHECK
After about 1 sec.
CHECK
CHECK
CHECK
CHECK
REPEAT
10
Checking magnification
* Suppose you want to know the magnification fac-
tor for double quantity in memory 1.
Procedure
CHECK
1 Touch CHECK pad.
DOUBLE
QUANTITY
2 Touch DOUBLE
QUANTITY pad.
1
3 Touch number pad.
Note: 1. To cancel memory check, touch the CHECK
pad.
2. The magnification factor 1.7 for the DOUBLE
QUANTITY is stored in all memories when
the oven is shipped.
Display
NO. CHECK
NO. X2 CHECK
NO. X2 CHECK
After about 1 sec.
X2 CHECK